School Value Added
This report shows average residuals (the difference between predicted and achieved scores) across a range of subjects. You can view your data for a selected academic year and compare it with either a national or independent sample.Use the key below the chart to compare your school’s data to the selected sample. A white bar shows an expected result. Other colours indicate results that are higher or lower than expected.
The shaded blue areas behind the bars represent the confidence limits of the data. Theseconfidence limits allow you to see whether a positive or negative standardised residual is(statistically) significantly different from zero. Two confidence limits are shown. The inner limit (dark blue) corresponds to a confidence limit of 95% and the outer limit (light blue) corresponds to a confidence limit of 99.7%.
You can use the Report Controls to select the range of data to view in the report:
Report Controls:
Set Exam yearTo change the Exam year, click Set Exam Year and select the exam year from the dropdown menu. If the exam results have not been uploaded for a particular year this exam year will not be available. Click Apply New Exam Year to save changes.
Sort byThe Sort by menu can be used to sort data by subject, average residual or difference from 99.7% confidence limit in either ascending or descending order.
Filter byFiltering allows you to specify what data is shown on your report.Changing a filter allows you to focus on a chosen set of data with a specific range of values.Click Edit to change the Field values for the following parameters:
Show - Display raw or standardised residuals
Year of Assessment - Select the CABT year group related to the exam year.
Qualification - Add or remove qualifications
Subject(s) - Add or remove subjects
Gender(S) - Filter by gender or select All
Remember to click OK to save any changes.
Adding a filter may reduce the available options for subsequent filters you wish to apply.
Exports
You can download different versions of the current report to allow for easier printing, sharing and analysis.
On selecting an export option your file will be generated. This may take from a few seconds to a few minutes to complete depending on the size of the export.
A spinning icon should appear beside your selected download to show that it is being generated. Please wait until this has completed before starting another export.
You may be asked to save each individual download or they may be saved automatically into your downloads directory depending on which browser you are using.
Large year groups may be split into multiple downloads.
Save
Save allows you to store the current report and retrieve it later.
All filters that are in place are saved, so you don't have to remember how you created the report.
Scores Value Added
This report compares predicted and achieved grades as point scores for each student in the selected subjects.
The difference between two scores is called a residual.
The raw residual is best for comparing student performance within a subject while the standardised residual allows you to make comparisons across subjects and over time.
Columns may be sorted using the small triangles next to the column heading.
You can use the Report Controls to select the range of data viewable in the report:
Report Controls:
Set Exam year
To change the Exam year, click Set Exam Year and select the exam year from the dropdown menu. If the exam results have not been uploaded for a particular year this exam year will not be available. Click Apply New Exam Year to save changes.
Score type
Changing the value of this control will change the scale used in this report. The CEM Scale runs from 0 to 9 whereas the QCA Scale runs from 0 to 64 (128 for double subjects).
Filter by
Filtering allows you to specify what data is shown on your report.
Changing a filter allows you to focus on a chosen set of data with a specific range of values.
Click Edit to change the Field values for the following parameters:
Standardisation - Display National or Independent standardisation
Year of Assessment - Select the CABT year group related to the exam year.
Qualification - Add or remove qualifications
Subject(s) - Add or remove subjects
Form(s) – Select class (select all classes to see complete year group data)
Gender(s) - Filter by gender or select Female and Male to see all students
Student(s) - Add or remove individual students from the report
If data is missing from the report please check the filters.
Adding a filter may reduce the available options for subsequent filters you wish to apply.
Exports
You can download different versions of the current report to allow for easier printing, sharing and analysis.
On selecting an export option your file will be generated. This may take from a few seconds to a few minutes to complete depending on the size of the export.
A spinning icon should appear beside your selected download to show that it is being generated. Please wait until this has completed before starting another export.
You may be asked to save each individual download or they may be saved automatically into your downloads directory depending on which browser you are using.
Large year groups may be split into multiple downloads.
Save
Save allows you to store the current report and retrieve it later.
All filters that are in place are saved, so you don't have to remember how you created the report.
Subject Value Added
This report compares predicted and achieved grades as point scores for each student in the selected subject.
The difference between two scores is called a residual.
The raw residual is best for comparing student performance within a subject while the standardised residual allows a comparison to be made across subjects and over time.
Female students are shown in green and male students in purple.
Columns may be sorted using the small triangles next to the column heading.
You can use the Report Controls to select the range of data viewable in the report:
Report Controls
Set Exam year
To change the Exam year, click Set Exam Year and select the exam year from the dropdown menu. If the exam results have not been uploaded for a particular year this exam year will not be available. Click Apply New Exam Year to save changes.
Layout
Select the layout you prefer (graph and table together or separately).
Filter by
Filtering allows you to specify what data is shown on your report.
Changing a filter allows you to focus on a chosen set of data with a specific range of values.
Click Edit to change the Field values for the following parameters:
Standardisation - Display raw or standardised residuals
Qualification - Add or remove qualifications
Subject - Select subject
Year of Assessment - Select the CABT year group related to the exam year.
Gender(S) - Filter by gender or select All
If data is missing from the report please check the filters.
Adding a filter may reduce the available options for subsequent filters you wish to apply.
Exports
You can download different versions of the current report to allow for easier printing, sharing and analysis.
On selecting an export option your file will be generated. This may take from a few seconds to a few minutes to complete depending on the size of the export.
A spinning icon should appear beside your selected download to show that it is being generated. Please wait until this has completed before starting another export.
You may be asked to save each individual download or they may be saved automatically into your downloads directory depending on which browser you are using.
Large year groups may be split into multiple downloads.
Save
Save allows you to store the current report and retrieve it later.
All filters that are in place are saved, so you don't have to remember how you created the report.
School Performance
The red line shows your school's performance over time for a specific subject or school level GCSE compared with either a national or an independent sample.
Like the School Value Added report the shaded blue areas behind the red line representthe confidence limits of the data. These confidence limits allow you to see whether a positive ornegative standardised residual is (statistically) significantly different from zero. Two confidencelimits are shown. The inner limit (dark blue) corresponds to a confidence limit of 95% and theouter limit (light blue) corresponds to a confidence limit of 99.7%.
You can use the Report Controls to select the range of data viewable in the report:
Report Controls
Assessment Year range
Use the assessment year range bar to set the required range. Pressing the Update button will then filter the report immediately.
Filter by
Filtering allows you to specify what data is shown on your report.
Changing a filter allows you to focus on a chosen set of data with a specific range of values.
Click Edit to change the Field values for the following parameters:
Standardisation - Display National or Independent standardisation
Subject - Select a subject or School Level GCSE
Year Group - Select the year group related to the assessment years selected.
If data is missing from the report please check the filters.
Adding a filter may reduce the available options for subsequent filters you wish to apply.
Exports
You can download different versions of the current report to allow for easier printing, sharing and analysis.
On selecting an export option your file will be generated. This may take from a few seconds to a few minutes to complete depending on the size of the export.
A spinning icon should appear beside your selected download to show that it is being generated. Please wait until this has completed before starting another export.
You may be asked to save each individual download or they may be saved automatically into your downloads directory depending on which browser you are using.
Large year groups may be split into multiple downloads.
Save
Save allows you to store the current report and retrieve it later.
All filters that are in place are saved, so you don't have to remember how you created the report
Comments
0 comments
Please sign in to leave a comment.